FS: IF ti deluxe 29er
Home › Forums › Classifieds › FS: IF ti deluxe 29er
Tagged: Independent fabrication, moots, paul components, Ti Deluxe, Titanium, willits, xtr
- This topic has 3 replies, 1 voice, and was last updated 11 years, 11 months ago by Darren.
-
AuthorPosts
-
18 April 2012 at 2:18 am #4713DarrenMember
2001 Independent Fabrication Ti Deluxe 29’er
http://s1270.photobucket.com/albums/jj612/dling2/
…ONLY FULL BIKE pic quality is poor, going to photograph tomorrow when it’s bright out. Email me and I can send you those photos if you are interested…all other photos show great clarity.
Non-disc, EXCELLENT condition, sent back to IF in 2010 for re-shot peen and added paint panels/decals
18″ Seat tube length
22.5″ effective top tube length
3.9″ head tube length
Bike is set up as a single speed conversion, but I am including parts to make it a 1×9.
Chris King/Salsa Delgado Cross wheelset, 32 H.
Rear hub – Black King classic, new minus 4 miles
Front hub – Black King classic, new minus 4 miles
Salsa rims – vgc – maybe have 100 miles on them
Silver spokes. Straight gauge front spokes, double butted rear.
Chris King bottom bracket – vgc
1 and 1/8th” Chris King sotto voce hs – vgc
King headset spacer kit
XTR 960 crankset, clear Crankskins (protectors) installed since new – vgc
XTR chainrings included – vgc
XTR 970 trigger shifters included – Front shifter brand new, rear shifter – vgc
XTR 970 rear derailleur, long cage, top normal, vgc, included
Moots ti seatpost, old style, re-shot peened by moots – 4 miles
Ti water bottle bolts (4)
Ti headset bolt (1)
Homebrewed components 34 T SS ring – 4 miles on it
Homebrewed components bash ring – 4 miles on it
1 and 1/8th” threadless Willits W.O.W. rigid fork, long steerer, sent to Spectrum Powder Works for powder coat this February 2012 – 4 miles since re-powder – non-disc
Surly SS spacer kit – 4 miles
Surly 22 t SS cog – vgc
SRAM 8 speed chain, vgc
Crankbrothers skewers – vgc
Avid Ultimate Black Ops Research V brakes – vgc, Kool Stop Pads (black)
Paul Components Compact Love Lever – black, vgc
Titec J bar, 31.8 – good condition – some marks from removing/installing shifters/levers on the J bend, vgc
1 AND 1/8th” Thomson X4 31.8 stem x 130, 4 miles on it
Shimano XT cassette – vgc, very low miles, maybe 100
Jagwire brake cables – 4 miles
N – Gear jump stop
Tires – Specialized Captain 2.0 and Stan’s No tubes the Crow, 2.0
Very very minor chainsuck mark since refinish behind chainring. Hard to see with crank installed.
2 very minor dings in downtube, above the bottom bracket. IF confirmed they are cosmetic. See pics, hard to see. One shows up barely, the other, not at all in pic.
Paint chips (2 tiny)on drive side rear seatstay painted panel, touched up, see pic
very minor rub from bottle under down tube bottle, see pic
Brooks Saddle (pictured) not included
This bike has been VERY lightly ridden since the refurb, as I have ridden another SS only IF almost exclusively. It is in incredible shape. Has no evidence of chainslap.
Bike has limited space for a wide rear tire. You won’t be able to run a 2.35 on the rear as it was made before IF did curved seat and chainstays. I have had zero issues running my Stan’s Crow 2.0 tire on it, with room to spare.
Extras: Cal-Van spreader tool, so you can put a saddle on the Moots post.
Surly Singulator tool/bottle opener so you can adjust the Singulator
New/extra decals for the Willits fork.
If you want it: Misc. original packaging and instructions for Avid Ultimate brakes, Paul love levers, IF one off headset cap, Surly Singulator and Spacer kit packaging, Singulator springs for both push up, pull down, Moots box from post refurb, King front hub box and warranty/instruction booklet, etc. I’m a little OCD.
$2300 shipped
Will sell/ship only to the lower 48 US.
Sold as is, all sales final.
Paypal, buyer pays the fees, or send me a check please.
Thanks!
Darren
darren dot ling 1 at g mail dot com
- This topic was modified 11 years, 9 months ago by Cris Bloomfield.
22 April 2012 at 11:56 am #5011DarrenMemberIt would help if I measured the effective top tube correctly…sorry. 22.75 inches.
Darren
5 May 2012 at 11:27 am #5012DarrenMemberprice drop to $2000 need to sell
20 May 2012 at 5:17 pm #5013DarrenMemberSold, thanks!
-
AuthorPosts
- The topic ‘FS: IF ti deluxe 29er’ is closed to new replies.