FS: IF ti deluxe 29er

Home Forums Classifieds FS: IF ti deluxe 29er

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #4713
    Darren
    Member

    2001 Independent Fabrication Ti Deluxe 29’er

    http://s1270.photobucket.com/albums/jj612/dling2/

    …ONLY FULL BIKE pic quality is poor, going to photograph tomorrow when it’s bright out. Email me and I can send you those photos if you are interested…all other photos show great clarity.

    Non-disc, EXCELLENT condition, sent back to IF in 2010 for re-shot peen and added paint panels/decals

    18″ Seat tube length

    22.5″ effective top tube length

    3.9″ head tube length

    Bike is set up as a single speed conversion, but I am including parts to make it a 1×9.

    Chris King/Salsa Delgado Cross wheelset, 32 H.

    Rear hub – Black King classic, new minus 4 miles

    Front hub – Black King classic, new minus 4 miles

    Salsa rims – vgc – maybe have 100 miles on them

    Silver spokes. Straight gauge front spokes, double butted rear.

    Chris King bottom bracket – vgc

    1 and 1/8th” Chris King sotto voce hs – vgc

    King headset spacer kit

    XTR 960 crankset, clear Crankskins (protectors) installed since new – vgc

    XTR chainrings included – vgc

    XTR 970 trigger shifters included – Front shifter brand new, rear shifter – vgc

    XTR 970 rear derailleur, long cage, top normal, vgc, included

    Moots ti seatpost, old style, re-shot peened by moots – 4 miles

    Ti water bottle bolts (4)

    Ti headset bolt (1)

    Homebrewed components 34 T SS ring – 4 miles on it

    Homebrewed components bash ring – 4 miles on it

    1 and 1/8th” threadless Willits W.O.W. rigid fork, long steerer, sent to Spectrum Powder Works for powder coat this February 2012 – 4 miles since re-powder – non-disc

    Surly SS spacer kit – 4 miles

    Surly 22 t SS cog – vgc

    SRAM 8 speed chain, vgc

    Crankbrothers skewers – vgc

    Avid Ultimate Black Ops Research V brakes – vgc, Kool Stop Pads (black)

    Paul Components Compact Love Lever – black, vgc

    Titec J bar, 31.8 – good condition – some marks from removing/installing shifters/levers on the J bend, vgc

    1 AND 1/8th” Thomson X4 31.8 stem x 130, 4 miles on it

    Shimano XT cassette – vgc, very low miles, maybe 100

    Jagwire brake cables – 4 miles

    N – Gear jump stop

    Tires – Specialized Captain 2.0 and Stan’s No tubes the Crow, 2.0

    Very very minor chainsuck mark since refinish behind chainring. Hard to see with crank installed.

    2 very minor dings in downtube, above the bottom bracket. IF confirmed they are cosmetic. See pics, hard to see. One shows up barely, the other, not at all in pic.

    Paint chips (2 tiny)on drive side rear seatstay painted panel, touched up, see pic

    very minor rub from bottle under down tube bottle, see pic

    Brooks Saddle (pictured) not included

    This bike has been VERY lightly ridden since the refurb, as I have ridden another SS only IF almost exclusively. It is in incredible shape. Has no evidence of chainslap.

    Bike has limited space for a wide rear tire. You won’t be able to run a 2.35 on the rear as it was made before IF did curved seat and chainstays. I have had zero issues running my Stan’s Crow 2.0 tire on it, with room to spare.

    Extras: Cal-Van spreader tool, so you can put a saddle on the Moots post.

    Surly Singulator tool/bottle opener so you can adjust the Singulator

    New/extra decals for the Willits fork.

    If you want it: Misc. original packaging and instructions for Avid Ultimate brakes, Paul love levers, IF one off headset cap, Surly Singulator and Spacer kit packaging, Singulator springs for both push up, pull down, Moots box from post refurb, King front hub box and warranty/instruction booklet, etc. I’m a little OCD.

    $2300 shipped

    Will sell/ship only to the lower 48 US.

    Sold as is, all sales final.

    Paypal, buyer pays the fees, or send me a check please.

    Thanks!

    Darren

    darren dot ling 1 at g mail dot com

    #5011
    Darren
    Member

    It would help if I measured the effective top tube correctly…sorry. 22.75 inches.

    Darren

    #5012
    Darren
    Member

    price drop to $2000 need to sell

    #5013
    Darren
    Member

    Sold, thanks!

Viewing 4 posts - 1 through 4 (of 4 total)
  • The topic ‘FS: IF ti deluxe 29er’ is closed to new replies.

Trackback URL

Built by Asteriskr | Powered by Wordpress | Served by Aegishosting | RSS Feed | Twitter Feed | Log in |

© 2004-2013 Independent Fabrication Owners' Club: All text and images copyright unless otherwise stated